23 March 2009

building a tilt-shift plungercam lens for less than $25



New visitors: the updated DIY tilt-shift lens tutorial is here: http://cow.mooh.org/projects/tiltshift.

In it, I've got a comprehensive guide to how tilt-shift works, along with a guide to using existing 35mm lenses to build DIY tilt-shift lenses.





On the weekend I finally got organized and with some help from Briony we finished attaching a male EOS adapter on to a toilet-plunger - because, lets face it, there isn't any more productive activity than affixing low-end plumbing equipment to high-end optics :P From certain angles, it looks totally badass. From most angles, it looks like a toilet plunger. The whole thing was built for less than US$25, so I can't really complain.

My previous attempts at tilt-shift have ranged from pure fakery to some fairly decent results achieved by holding a prime lens a little away from the camera body and simply just tilting it. However, this was a fast path to getting dust and grime in the camera body, so I started to seek out a closed solution.

One key disadvantage of using a 35mm prime lens for tilt-shift is that the flange focal depth of the lens means that it has to sit right next to or even slightly inside the camera body to get a picture. However, by using a medium format lens, which has a longer flange focal depth and a bellows arrangement, you can afford to move the lens about a bit more. Two people who've championed this technique (and used a plunger as bellows) have been Dennison Bertram and Keith Loh, from whom I draw my inspiration for this project.

For this particular implementation, I wanted a fairly strong, permenant solution that would still allow me to swap out the lens at end of the bellows. My materials list was:

Canon EOS body cap

I first used a hobby knife to make an aperture as large as possible in the body cap; this was going to be the EOS mount for the plungercam.

Attaching the EOS body mount

I lopped the head and tail off the plunger; the smaller end had a diameter to match that of the body cap, and the larger end that of the lens. Here you can see where the male EOS adapter was attached. I was aiming to do this completely without screws or glue, but I ended up needing to glue the adapter into place to make a secure fit.

lens attachment

The lens is held into place by slotting into the end of the plunger, into a flange made up of tabs cut from the end of the plunger plastic. A screw-clamp is put around the lens and the tabs so it all holds together, which is seems to do quite securely.

Completed plungercam

I was a bit worried that the lens would bend the plastic and would need constant holding. However, the plunger is relatively stiff, and I feel fairly confident that the lens mechanism holds up under its own weight without flopping about dangerously. And there you have it - probably one of only a few toilet plungers in the world that come with an EOS mount.

Once you work out a way of holding the lens comfortably, it's pretty easy to tweak the focus of the lens. It's quite sensitive to position, and the rubber is fairly stiff, so I it's not advisable to use it for long-exposure shots. Also, the lens completely and utterly throws out spot metering. The fix is to switch back to evaluative metering (bah! humbug!) and underexpose the image a little (one f-stop seemed to work for me); this way you can merrily shoot in aperture priority mode without having to constantly tweak the shutter speed.

But does it take decent pictures? I did a field test with it yesterday, and I've included some highlights below (click on the images to see larger versions). It's still early days yet with this lens, but I'll leave the quality judgement up to you.

plungercam test 03
Here the lens really shows its lovely shallow depth of field. From the tests so far, I really do think it's ideal for portrait and macro shots as opposed to trying to miniaturise cities.

plungercam test 04

plungercam test 02
Later on in the day, after a bit of practice, it became pretty easy to select a target to focus on in the image.

plungercam test 01
Another tilt-shift artifact - bright lights (see reflection of tail-lights in the window on the right) become big, fuzzy bokeh highlights. This might be a boon for some, but maddening for others.

plungercam test 05
I really love what real tilt-shift does to parallel lines in the image - what seems to happen is that the blur increases as you move away from the focal plane.

See some of my other DIY projects (plungercam 2, iPhone SLR lens adapter, papercraft etc) here.

16 comments:

racepics said...

Hello, tkx for the info. Looks like you have it working well. Hope you keep posting info as you work with this idea.

Caroline said...

Wow what a neat thing to do!

(I saw this on photojojo)

Coach Dunn said...

Hey! I'm so excited to try this for my camera. I have an old Pentax K1000 with a 50mm lens. I'm assuming I need a 50mm medium format lens? Thanks for your help.

Bhautik Joshi said...

@Coach_Dunn: 50mm medium format lens would be nice, but any relatively short (i.e. <80mm) medium format lens gives a pretty nice result.

Coach Dunn said...

ok great! I know very little about photography... sorry! The lens must be medium format, right? And that would be affixed directly to the "plunger" which is fixed to existing lens?

Bhautik Joshi said...

@Coach_Dunn - the aim here is to create a new lens housing for the medium format lens, and attach that to the camera body. You might want to look at the design plungercam 2 instead, as it is a little bit more straightforward to construct:

http://cow.mooh.org/2009/07/plungercam-2-cheaper-and-more.html

matteh said...

Thank you for the tutorial. I'm going to check out your plunger 2 post and might give this a go this weekend. What a fun way to increase one's lens collection on a budget! Would a wide angle medium format lens work to allow for wider view? Do you suggest staying with 50mm?

Bhautik Joshi said...

@matteh: 50mm would be great; I think it's a good all-round focal distance for experimenting with. However, if you go wider, you can have fun with that too. See:

http://www.flickr.com/search/?q=plungercam+mini&w=50847591%40N00&ss=2&s=rec

and:

http://cow.mooh.org/2009/12/plungercam-mini-prototype.html

Good luck!

Mark N. said...

You fool! You should have patented that. That is awesome. The bronica lenses are very good actually. It could be nice to have a wider one, but that would raise the costs. Your pictures look great. Post some more. A russian Arsat medium format fisheye might be a cool one to try.

Nahuel Coca said...

Hi there. I am trying this with my Canon 50D and a 50mm 1.8 MkIII lens, BUT it´s not working. Any ideas? Only medium format lens would do? Thank you,
Nahuel

Bhautik Joshi said...

Hi Nahuel,

Check out: http://cow.mooh.org/projects/tiltshift

AikoKanami said...

fo u do video tutorial.... it will be better... i can understand visually faster

Bhautik Joshi said...

@AikoKanami A video tutorial would be fun but the main problem is that I simply don't have the time to do it :)

Unknown said...

Hello
THis is a very good and informative post.....I am very much like to give a try....since I am a amateur and everything is very much new to me...I have recently bought a 50mm lens from ebay "Sears Auto 50mm f/1.7 Camera Lens PK Mount"...I am not sure whether this lens works for making tiltshift or not? It would be great help for me if you let me know about this lens.

RIM Photography - R. Ian McDowell said...

Would using the t mount (Plungercam 2 design) instead of the camera cap still function the same on the Plungercam Classic?

Bhautik Joshi said...

A t-mount works even better than a body cap :)